Upload files to "/"

nx30pro_upgrade.sh

@@ -0,0 +1,107 @@
+#!/bin/bash
+# NX30Pro 一键升级脚本
+# 固件来源: https://git.stickrouter.com/mike/N30pro/raw/branch/main/nx30pro512.bin
+# 目标路由器: 192.168.6.66
+
+ROUTER_IP="192.168.6.66"
+ROUTER_USER="root"
+FIRMWARE_URL="https://git.stickrouter.com/mike/N30pro/raw/branch/main/nx30pro512.bin"
+FIRMWARE_NAME="nx30pro512.bin"
+REMOTE_PATH="/tmp/${FIRMWARE_NAME}"
+
+R="\033[91m"; G="\033[92m"; Y="\033[93m"; C="\033[96m"; W="\033[0m"
+
+log()  { echo -e "${G}[INFO] $1${W}"; }
+warn() { echo -e "${Y}[WARN] $1${W}"; }
+err()  { echo -e "${R}[ERR]  $1${W}"; exit 1; }
+step() { echo -e "\n${C}${'='*50}\n  $1\n${'='*50}${W}"; }
+
+echo -e "${C}"
+echo "=================================================="
+echo "  NX30Pro 一键升级脚本"
+echo "  目标路由器: ${ROUTER_IP}"
+echo "  固件来源: Gitea"
+echo "=================================================="
+echo -e "${W}"
+
+# 检查 ssh/scp 是否可用
+for cmd in ssh scp wget curl; do
+    command -v $cmd &>/dev/null || err "缺少依赖: $cmd，请先安装"
+done
+
+# 检查路由器是否可达
+echo -e "\n${C}[步骤 1/4] 检查路由器连接${W}"
+ping -c 1 -W 3 ${ROUTER_IP} &>/dev/null || err "无法连接到路由器 ${ROUTER_IP}，请检查网络"
+log "路由器 ${ROUTER_IP} 可达"
+
+# 下载固件到本地 /tmp
+echo -e "\n${C}[步骤 2/4] 下载固件${W}"
+LOCAL_FW="/tmp/${FIRMWARE_NAME}"
+if [ -f "${LOCAL_FW}" ]; then
+    warn "本地已存在固件文件，跳过下载"
+else
+    log "从 Gitea 下载固件..."
+    wget -q --show-progress "${FIRMWARE_URL}" -O "${LOCAL_FW}" || \
+    curl -L --progress-bar "${FIRMWARE_URL}" -o "${LOCAL_FW}" || \
+    err "固件下载失败"
+fi
+log "固件大小: $(du -h ${LOCAL_FW} | cut -f1)"
+
+# 上传固件到路由器 /tmp
+echo -e "\n${C}[步骤 3/4] 上传固件到路由器${W}"
+log "正在上传到 ${ROUTER_IP}:${REMOTE_PATH}..."
+scp -o StrictHostKeyChecking=no \
+    -o UserKnownHostsFile=/dev/null \
+    -o ConnectTimeout=10 \
+    "${LOCAL_FW}" "${ROUTER_USER}@${ROUTER_IP}:${REMOTE_PATH}" || err "上传失败"
+log "上传完成"
+
+# 验证文件大小
+REMOTE_SIZE=$(ssh -o StrictHostKeyChecking=no \
+    -o UserKnownHostsFile=/dev/null \
+    "${ROUTER_USER}@${ROUTER_IP}" \
+    "wc -c < ${REMOTE_PATH} 2>/dev/null")
+LOCAL_SIZE=$(wc -c < "${LOCAL_FW}")
+
+if [ "${REMOTE_SIZE}" != "${LOCAL_SIZE}" ]; then
+    err "文件大小不一致，上传可能失败 (本地: ${LOCAL_SIZE}, 远程: ${REMOTE_SIZE})"
+fi
+log "文件校验通过 (大小: ${LOCAL_SIZE} bytes)"
+
+# 执行升级
+echo -e "\n${C}[步骤 4/4] 执行固件升级${W}"
+warn "升级过程中请勿断电！路由器将自动重启..."
+warn "升级完成后请访问 http://192.168.6.66 登录管理界面"
+echo ""
+read -p "确认升级? (y/N): " confirm
+if [[ "${confirm}" != "y" && "${confirm}" != "Y" ]]; then
+    warn "已取消升级"
+    exit 0
+fi
+
+log "开始升级..."
+ssh -o StrictHostKeyChecking=no \
+    -o UserKnownHostsFile=/dev/null \
+    "${ROUTER_USER}@${ROUTER_IP}" \
+    "sysupgrade -F -n ${REMOTE_PATH}" &
+
+echo ""
+log "升级命令已发送，路由器正在重启..."
+log "等待路由器重启完成 (约60秒)..."
+sleep 60
+
+# 检查路由器是否重启完成
+for i in {1..10}; do
+    if ping -c 1 -W 3 ${ROUTER_IP} &>/dev/null; then
+        echo ""
+        echo -e "${G}=================================================="
+        echo "  ✅ 升级完成！"
+        echo "  请访问 http://${ROUTER_IP} 登录管理界面"
+        echo -e "==================================================${W}"
+        exit 0
+    fi
+    log "等待路由器上线... ($i/10)"
+    sleep 10
+done
+
+warn "路由器未能在预期时间内上线，请手动检查"